Align Trex 500 ESP 3G Combo (Trex 500 ESP-KX017012)

Features of the TREX 500 ESP 3G:


1. 3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
2. Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
3. 12 bit processors providing ultra high resolution, resulting in highly precise controls
4. Software upgradable through PC interface adapter (sold eparately)
5. Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
6. Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
7. Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
8. Suitable for all CCPM and mechanical mixing system.
9. Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
10. Innovative Pitch Gau as an aid to facilitate pitch adjustments.
11. High frame rate signal output for faster and higher precision servo response.
12. Capable to operate between 3V to 8.4V, compatible with high voltage servos.
13. Small footprint, light weight, minimalists and reliable design.

Features of 3G Programmable Flybarless System :

●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter
(sold separately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Compatible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gauge as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 3V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design.

Specification (3G Programmable Flybarless System) :

●Suitable Voltage Range:DC 3~8.4V
●Current Consumption:<80mA @ 4.8V>
●Flip and Roll rate detection speed: :±300degrees/sec
●Rudder rate detection speed:±500degrees/sec
●Sensor resolution: 12bit
●Operating temperature:-20℃~65℃
●Operating humidity:0%~95%
●RoHS certified
●Dimension:
Control box:42x26.5x14.5mm
Sensor:22.3x21.7x14mm
●Weight:
Control box : 16g
Sensor : 9g

Specification (T-REX 500 ESP) :

● Length : 840mm
● Height : 310mm
● Main Blade Length : 425mm
● Main Rotor Diameter : 970mm
● Tail Rotor Diameter : 200mm
● Motor Ponion Gear : 13T
● Main Drive Gear : 162T
● Autorotation Tail Drive Gear : 145T
● Tail Drive Gear : 31T
● Drive Gear Ratio : 1:12.46:4.68
● Weight(w/o power system) : 910g
● Flying Weight : Approx 1700g
● Color carton : 48.3x18.7x9.8cm
● Outer carton : 58x50x42cm ,12sets/ctn

Included Accessories :
● T-REX 500 ESP 3G Kit Set X 1 set
● 425 carbon fiber blades X 1
● RCE-BL60G 60A Brushless ESC X 1 (Built-in 5-6V step-less adjustable BEC)
● 500M Brushless motor X 1
● Motor ponion gear 13T X 1
● DS510 M Digital Servo X 3
● DS520 Digital Servo X 1
● 3G Programmable Flybarless System X 1

Radio transmitter and electronic equipment required for assembly:
●Transmitter r(7-channel or more, helicopter system)
●Receiver (7-channel or more)
●22.2V 6S Li-Po 2100~2600mAh battery X 1
●Dial Pitch Gauge