Walkera 2.4Ghz V400D02 6 Channel RC Helicopter with WK 2603

Simplicity is good - V400D02 Outdoor Helicopter

Beginners always demand a practice model for fist time outdoor flying, and now this model is arrived - the V400D02. It is a Flybarless Collective Pitch Helicopter with tail motor controlled rudder. In short, it is the low price model for all kinds of practicing. First, the use of normal brushed motor and tail motor have greatly reduced the manufacturing cost, and it adapted the latest RC Heli technology, that is the 3-Axis Gyro and the Flybarless Rotor Head reduced 50% of moving parts, this makes the production much faster and easier, and you have a lot less parts to replace after a crash, so it would be a Win Win solution for all players! You may say it is a low price model and just "OK" to make a simple hovering? On the contrary, it flies very well! Thanks for a few good features on the V400D02, the light weight, the flybarless collective pitch(CP) rotor head, the 3-Axis Gyro and powerful motor, we can do 3D aerobatic flight with the stock setup!

What is a Flybar?
The flybar is a short, thin metal rod placed on top of the helicopter. It is part of the rotor head’s structure, usually attached with a paddle on both ends. The flybar is a stabilizer. The heavier the paddle and longer the flybar, the more stable the heli. However, you can compensate by using the high-tech 3-Axis Gyro. The onboard RX2433V Super Controller makes the V400D02 fly so well that it performs just like an ordinary rotor head helicopter.

Why Make it “Flybarless?”
Flybarless means less moving parts. That saves energy and allows you to fly 20 to 30 percent longer. Also, less parts mean less repairing. Flybarless is the future of RC helicopters!

What is 3-Axis Gyro?
3-Axis Gyro means it can sense X, Y and Z axis moments, that means body leaning forward / backward, body rolling left / right, tail drifting CW / CWW, it will constantly monitoring any off-balance in all directions, then it will give signals to all CCPM servos and Rudder servo to balance the helicopter, it works constantly and unless you have the helicopter drifts to much, you will not even notice the system exists, please take a look at the following picture.



  

Features

• The metal rotor head cut by CNC, designed without flybar, features low power loss and great efficiency improvement.
• Controlled by 3-axis gyro, with flybarless balance electronic system, amend flight status  automatically, makes more stable flight and flexible 3D performance
• High performance brush motor powered by 11.1v 120mAh Li-Po battery can fly 8 minutes after full charged.
• 2.4G Frepquncy-hpping spread spectrum technology automatically assigns ID code with strong anti-jamming and high accuracy.
   

• Main Rotor Diameter : 635mm

• Tail Rotor Diameter : 136mm

• Overall Length : 60mm

• All-up Weight : 510g (Battery included)

• Brush ESC : V400D02ESC

• Receiver : RX-2614V

• Transmitter : WK-2603

• Moril Motor : 380PF

• Battery : 11.1v 1200mAh Li-Po

• Gyro : Built-in

• Tail Motor : 1627F

• Servo : wk-7.6-5 weight 8.5g / speed 0.11 sec/ 60 (4.8V) torque 0.9kgf.cm (4.8v) / dimension 22.5 x 11.8 x 24mm

Package Includes:

1.6-Ch 2.4G WK2603 Digital Transmitter
2.Pre-assembled Helicopter
3.Battery Charger ( Suitable for your country )
4.11.1V 1200mAh Li-Po Battery
5.Adjustment Tool and Spare Gears
6.Instruction Manual